Metal Architecture Home
Features

Rustic Identity

Mixed-use brewery building adopts agricultural design

Metals Slo Pic 4 High Res
Photo: Architectural Shots, Michael Urbanek

SLO Brewing Co.’s mixed-use facility in San Luis Obispo, Calif., SLO Brew Rock, was designed to meet two overarching goals. It needed to fit with surrounding architecture and combine lots of functions in one building. On the exterior, the design had to work within the context of an office park. Inside, it had to house a brewery, laboratory, restaurant, commercial kitchen, gymnastics studio, event space and storage space.

Steven Pults, AIA, principal at San Luis Obispo-based Steven D. Pults AIA and Associates LLP, says, “It was the combination of uses, and how you put this manufacturing facility in the middle of an office park and have it make sense; I think those were the two biggest challenges.”

Contrasting Designs

Instead of matching the manufacturing and retail facility to the office buildings, Pults and Associates contrasted the two. The office buildings, which the firm also designed, are modern, winged structures. They have a high-tech appearance inspired by San Luis Obispo County Regional Airport, which is next to the property. Conversely, the brewery building has an agricultural and rustic design.

“The rustic design draws attention to it and gives it an identity; it’s clearly the brewery,” Pults says. “We kind of struggled in the beginning with how to put this in the middle of these office buildings, which are pretty unique. At one point, we considered designing the brewery in a style similar to the office buildings, but decided that was crazy. So we came up with the concept to make the brewery entirely different so that everybody could tell what it was.”

Photo: Architectural Shots, Michael Urbanek

Meshing Uses

The 32,874-square-foot facility houses 14,303 square feet for brewery production and storage, a 9,782-square-foot gymnastics studio and 3,047-square-foot event space. Additionally, it has a 2,119-square-foot restaurant, 1,937-square-foot kitchen and 1,686-square-foot mezzanine with offices.

Pults and Associates used a metal building system supplied by Lathrop, Calif.-based CBC Steel Buildings to accommodate all the uses. For one thing, the brewing tanks and other equipment required high ceilings. Also, to allow patrons in the restaurant to view the brewery, a glass wall was built in between the two. To serve the restaurant and event space at the same time, the kitchen was given an extra large capacity. “It’s basically two commercial kitchens,” Pults says. “So that was probably the biggest challenge, getting all the uses in the same space.”

Three-Part Layout

To organize the spaces, Pults and Associates divided the building in thirds. The center third houses the brewery and has the restaurant in front of it. Facing the front of the building, the left side contains the gymnastic studio and event space, and the right side houses a laboratory and storage space for the brewery. The roof has seven peaks, three in the middle third and two at each side. “Each one of those pods has its own structure, but they all tie together,” Pults says.

Pults and Associates used the exterior cladding to articulate the three sections. On the center third, Atascadero, Calif.-based Mills Construction Inc. installed 3,500 square feet of Louisville, Ky.-based Metal Sales Manufacturing Corp.’s 7/8-inch corrugated Corten wall panels. On the side thirds and restaurant, it installed 19,000 square feet of Metal Sales Manufacturing’s T2630 metal wall panels in Ash Grey and Old Zinc Grey. Additionally, at the windows on the sides, Mills Construction installed 3,000 square feet of Metal Sales Manufacturing’s 12-gauge flat Corten wall panels. For the entire roof, Mills Construction installed 48,500 square feet of Metal Sales Manufacturing’s 7/8-inch, corrugated, galvanized metal roof panels with a Galvalume finish.

“Part of the reason for the color change was the rust-colored middle was to indicate that’s where the tasting room and restaurant is, versus the rest of it, which is more or less manufacturing,” Pults says. “So that really led to the Corten siding on that space.”

Photo: Architectural Shots, Michael Urbanek

Coordinating Rock

The reddish-brown weathering steel and light grey panels match colors of a giant rock outcropping in front of the facility, for which it’s named, SLO Brew Rock. The owner wanted to keep the rock on the property and, during public hearings, representatives from the Chumash Indians said the rock was part of their tribe’s history. “The whole thing came down to, the rock had to stay,” Pults says.

So, the building was oriented to fit around the rock. The building and rock’s color coordination was a fortunate coincidence. Also fortunate, Pults says, “It is a good looking rock.”

SLO Brew Rock, San Luis Obispo, Calif.
Size: 32,874 square feet
Completed: March 2017
Owner: SLO Brewing Co., San Luis Obispo
Developer: AuzCo Developments, San Luis Obispo, auzcodevelopments.com
General contractor: Specialty Construction Inc., San Luis Obispo, www.specialtyconstruction.com
Architect: Steven D. Pults AIA and Associates LLP, San Luis Obispo, www.pults.com
Landscape architect: Oasis Landscape Inc., San Luis Obispo, oasisassoc.com
Structural engineer: Smith Structural Group LLP, San Luis Obispo, smithstructural.com
Installer: Mills Construction Inc., Atascadero, Calif., millsconstructioninc.com
Metal building system: CBC Steel Buildings, Lathrop, Calif., www.cbcsteelbuildings.com
Metal roof/wall panels: Metal Sales Manufacturing Corp., Louisville, Ky., www.metalsales.us.com