Metal Architecture Home

Fasteners

Fasteners - April 2016

Fasteners featured in Metal Construction News' April 2016 issue.

Dynamic Fastener

Dynamic Fastener

Dynamic Fastener offers multiple fasteners with zinc cast heads that will not rust. They are made of Zamak-5 zinc alloy. The line includes pole barn screws, T-1 stitch screws, T-3 metal-to-metal screws, T-5 screws for structural steel and self-tapping screws.

www.dynamicfastener.com

Grabber Construction Products Inc.

Grabber Construction Products Inc.

Grabber Construction Products' Vector Point Pan Head Streaker #2 Phillips screw drives through light-gauge metal. The #7-gauge, 7/16-inch-long metal framing fastener has twin lead thread and gray phosphate coating. Its pan head is fully seated when the head is flush with the work surface. The Vector Point Pan Head Streaker #2 Phillips screws must penetrate beyond the metal three full thread pitches to be secure.

www.grabberman.com

Sealtite Building Fasteners

Sealtite Building Fasteners

Sealtite Building Fasteners' Kwikseal WoodBinder penetrates multiple layers of steel at ridge caps and panel stitch applications. It is designed for post-frame and metal roofing panel applications. Kwikseal WoodBinder features micro-bit engineering and does not cause metal shaving pigtails that can embed in EPDM rubber sealing washers.

sealtite.com

ET&F Fastening Systems Inc.

ET&F Fastening Systems Inc.

ET&F Fastening Systems' pneumatically driven pins fasten plywood and OSB to 20-gauge- to 10-gauge-thick steel framing. The high-carbon, heattreated pins are an alternative to traditional screw fasteners used in coldformed steel framing. The building fasteners meet code requirements of the 2009, 2012 and 2015 International Building Codes (IBC) and International Residential Codes (IRC), and 2013 California Building Code.

www.etf-fastening.com

Leland Industries Inc.

Leland Industries Inc.

Leland Industries' Serrated Flange Lock Bolts are available in sizes ranging from 1/4-inch by 3/4-inch, to 5/8-inch by 4 inches. They are produced with carbon steel or stainless steel and are offered in Grade 5 and Grade 8.2. Additionally, Serrated flange nuts are available.

www.lelandindustries.com