Metal Architecture Home

Metal Wall Panels

Metal Composite Panels - November 2014

Metal Composite Panels featured in Metal Construction News' November 2014 issue.

3A Composites USA's Alucobond naturAL in Reflect finish consists of two sheets of 0.02-inch aluminum thermo-bonded to a plastic core and manufactured in standard 4-mm thickness.

 

3A Composites USA Inc.

3A Composites USA's Alucobond naturAL in Reflect finish consists of two sheets of 0.02-inch aluminum thermo-bonded to a plastic core and manufactured in standard 4-mm thickness. Alucobond naturAL colors mimic real metal surfaces and Reflect, Brushed, Graphite, Stainless, Zinc and Rust finishes are available.

www.alucobondusa.com

ACP Express' aluminum composite panel (ACP) Express system is randomly installed where grids of PVC attachment strips are attached to the wall and multiple panels are snapped into place along the grid.

 

ACP Express Inc.

ACP Express' aluminum composite panel (ACP) Express system is randomly installed where grids of PVC attachment strips are attached to the wall and multiple panels are snapped into place along the grid. Installation can begin anywhere on the exterior or interior wall surfaces and the system allows installation of the PVC grids while the pre-made panels are snapped in.

www.acpexpress.com

Alcoa Architectural Products' Reynobond composite panels with KEVLAR material can be rolled, routed, drilled and fabricated to meet complex design specifications, including angles and curves, and offers the flat, smooth surface of traditional aluminum composite material.

 

Alcoa Architectural Products

Alcoa Architectural Products' Reynobond composite panels with KEVLAR material can be rolled, routed, drilled and fabricated to meet complex design specifications, including angles and curves, and offers the flat, smooth surface of traditional aluminum composite material. Reynobond composite panels with KEVLAR material are installed using traditional wet-seal, dry-join, route-and-return, wet silicone-sealed rainscreen systems, or directly over structural studs without a heavy substrate.

www.reynobond.com

Firestone Building Products' UNA-CLAD Series 1000UC metal composite panels are a caulked barrier wall panel system. The composite metal is bonded to the thermoplastic core without using a laminating adhesive.

 

Firestone Building Products Co. LLC

Firestone Building Products' UNA-CLAD Series 1000UC metal composite panels are a caulked barrier wall panel system. The composite metal is bonded to the thermoplastic core without using a laminating adhesive. Large, flat surfaces in a variety of finishes are available. The system uses rout-and-return fabrication methods and is installed with the UNA-CLIP System. The clip is attached to the return flange of the panel via a pre-punched, pre-engineered slot.

www.firestonebpco.com

Umicore Building Products USA's VMZ Composite is a multilayered panel made of two sheets of zinc, 0.5-mm-thick and thermo-glued on either side of a polyethylene core.

 

Umicore Building Products USA Inc.

Umicore Building Products USA's VMZ Composite is a multilayered panel made of two sheets of zinc, 0.5-mm-thick and thermo-glued on either side of a polyethylene core. VMZ Composite panels are installed on a wall-mounted framework as part of a ventilated façade and may be installed in cassettes, or riveted and screwed.

www.vmzinc-us.com