Metal Architecture Home

Metalforming Equipment

Metalforming Equipment - October 2015

Metalforming Equipment featured in Metal Construction News' October 2015.

The Bradbury Group's automated cee and zee stacking system with auto nesting is designed to stack and nest purlins up to 300 feet per minute (FPM).

 

The Bradbury Group

The Bradbury Group's automated cee and zee stacking system with auto nesting is designed to stack and nest purlins up to 300 feet per minute (FPM). The stacking system features a programmable control for bundle size and can be placed behind the Bradbury QTR Purlin rollformer or retrofitted to an existing line.

www.bradburygroup.com

Metalforming, through its exclusive North American distributorship, offers Krasser GmbH's Legionnaire, which features automatic knife setting.

 

Englert Inc.

Englert's Metalman Multi-Panel Roofing Machine runs many sizes, gauges and types of material in 10 panel configurations including 1 1/2-inch snap-lock metal roof system, 2-inch curved mechanically seamed metal roof system and 1-inch integral snap-lock metal roof system. Forming rollers for each profile can be changed by one person.

www.englertinc.com

Metalforming, through its exclusive North American distributorship, offers Krasser GmbH's Legionnaire, which features automatic knife setting.

Metalforming Inc.

Metalforming, through its exclusive North American distributorship, offers Krasser GmbH's Legionnaire, which features automatic knife setting. Operators can automatically change five sets of slitting knives with a slitting accuracy of 1/32-inch. The Legionnaire has a 49.2-inch width capacity, 100 feet per minute (FPM) slitting rate, 20-gauge slitting capacity with five knives and 24-gauge slitting capacity with eight knives.

www.metalforming-usa.com

Van Mark Products' Trim-A-Slitter Perforator Combo cuts, slits and perforates many steel roof materials.

 

Van Mark Products Corp.

Van Mark Products' Trim-A-Slitter Perforator Combo cuts, slits and perforates many steel roof materials. It cuts material to width and perforates material for vents and soffits. The coil and sheet metal slitter features a high-torque electric motor, two sets of hardened steel knives, perforating dies and UniStand EZ-Go for job-site transportation.

www.van-mark.com

Developmental Industries' (D.I. Roof Seamers) D.I. Curver 1000 is a panel radius bender for snap-lock metal roof panels. It can bend roof panel radii to 24 inches, is compatible with seam heights 3/8-inch to more than 1 inch and is compatible with panel widths 12 inches to 18 inches wide.

Developmental Industries Inc.

Developmental Industries' (D.I. Roof Seamers) D.I. Curver 1000 is a panel radius bender for snap-lock metal roof panels. It can bend roof panel radii to 24 inches, is compatible with seam heights 3/8-inch to more than 1 inch and is compatible with panel widths 12 inches to 18 inches wide. The anodized aluminum bender features stainless steel tooling. The D.I. Cap Curver, a batten cap bender accessory, is also available.

www.diroofseamers.com