by Jonathan McGaha | 28 February 2013 12:00 am
The type of metal, the amount that needs to be removed, access to the working area, and type of finish all should be evaluated to select the tools that will get the job done correctly and efficiently. Keeping the application in mind while selecting abrasives will save you time and money in the end.
What metal are you working with?
Each type of metal has its own set of properties, and different wheels will work more efficiently on different metals you may be grinding. For example, if you are working with stainless steel, iron-free abrasives (or inox wheels) are the way to go. Iron-free products, such as Fall River, Mass.-based Rex-Cut Abrasives Inc.’s Sigma Green, will not contaminate the stainless steel, which eliminates the chance of rusting. For softer metals, such as aluminum, look for a non-loading wheel. Aluminum, which tends to become gummy when heated, will clog the incorrect wheel. Cotton fiber abrasives, such as Rex-Cut’s Type 27 blending wheel, continually shed and reveal new grain during the grinding process. The composition of this wheel eliminates the need for messy wax generally used to prevent bonded or coated products from loading.
![]() |
How much metal needs to be removed?
If you have a significant amount of metal to remove, such as a heavy weld, look for a wheel with fast stock removal. The coarser the grit, the quicker you can take the weld down. But, at the same time, the more aggressive the wheel, the rougher finish you are left with. The Sigma Green grinding wheel tackles this issue by having an aggressive aluminum oxide and zirconium composition made with layers of coarser-tofiner grit. This wheel will cut fast, cut cool, and leave a better than average finish; the 36 grit Sigma leaves a 100 RA while the 60 grit leaves an 80 RA. If the application calls for lighter work, such as creating a radius in a weld, look for a wheel that conforms. The Type 27 Cotton Fiber Blending wheel can be used on its edge and will round as it grinds. If your application calls for something with more give, the Type 1 Smooth Touch Wheels have a greater amount of flexibility compared to our standard cotton products. If you have just cut stainless steel sheet metal and need to debur the edges, cotton fiber mounted points, 54 Grit GFX, will do the job.
What type of finish does your application need?
Many applications call for two or three steps to reach the desired finish. The composition of Rex-Cut’s cotton fiber abrasive products enable grinding and finishing in one operation. These wheels have consistently reduced finishing steps from two or three, to just one. The reason for this timesaving factor is in the cotton. As the abrasive grit removes metal, the cotton polishes.
For applications such as hand railings, the Fusion Interleaf flap disc is a good option. This flap disc is a combination of premium-coated abrasive material with non-woven surface conditioning material. As a result, you can grind, blend, and finish in one operation.
To take the finish further, additional steps can be added after the Fusion to get a high-polish or a satin finish. Rex-Cut offers customized Satin and Polish finish kits that will achieve the finish in only three steps. For a high polish, switch to the Unitized wheel after the Fusion to blend any visible scratches. For step three, use the Polishing Disc and Paste to buff the railing for a mirror look. For a satin finish, after the Fusion disc, use the unitized disc then the Tex-Belt AOFN in a back-and-forth motion to re-apply and grain-in the satin finish. Videos on these processes are available on www.rexcut.com[1].
![]() |
Easy or restricted access to the work area? In a perfect situation you would have full access to the area you are working on, but not all situations are perfect. Many times, welds are in hard-to-reach areas, such as the inside of railing corners, or burrs are in small decorative details. If you have finished a beautiful railing but can’t reach the inside corner, extenders are sold for right-angle grinders and Rex-Cut has a unitized inside corner weld blending disc available. For applications in even smaller areas such as deburring decorative pieces, mounted points are a great option. A, B and W shapes are available in cotton fiber, unitized and rubber. For even smaller areas where grinders can’t reach, handheld finishing sticks are an option.
Kate Ouellette is marketing manager at Rex-Cut Abrasives Inc., Fall River, Mass. To learn more, visit www.rexcut.com[1]
Source URL: https://www.metalconstructionnews.com/articles/choosing-the-correct-tools-in-your-application/
Copyright ©2026 Metal Construction News unless otherwise noted.