by Jonathan McGaha | 31 December 2010 12:00 am
The original through-fastened metal roof system of Peterson Air Force Base Hangar in Colorado Springs, Colo. had severe leaks and was in critical need of replacement. Due to its strength, aesthetic appearance and its ability to create a watertight system, the solution was a standing-seam metal system by Cleveland, Ohio-based The Garland Co. With the hanger’s 7:12 slope, the standingseam system provides the durability and watertight integrity needed for a long-term high-performance solution. The product of choice was the 22-gauge, 16-inch R‑Mer Span panels because the panels have a unique profile that contains mesas throughout the panel to minimize “oil canning.” The use of exposed fasteners at the eaves allows the panels to move during thermal fluctuations, eliminating the possibility the roof panels will tear and subsequently leak.
The goal of the 50,000 square feet
(30,000-square-foot metal/20,000-square-foot modified bitumen) project was to create watertight integrity to protect the military aircrafts stored inside. The existing roof system was removed down to the deck and the contractor and then an SBS-modified base sheet was installed over the top of polyisocyanurate insulation with an R-value of 20. To achieve watertight integrity, the 78-foot Galvan-coated steel standing-seam panels were rollformed on the job to create a continuous panel with no gaps. In addition, the metal and modified portions of these high-performance roofing solutions were provided by a single full-service manufacturer and covered by a 30-year warranty.
Peterson Air Force Base Hangar,
Colorado Springs, Colo.
Owner: Phil Algien, Civil Engineering
Division, Peterson Air Force Base,
Colorado Springs
Contractor/installer: Weathercraft Roofing
Inc., Colorado Springs
Manufacturer: The Garland Co.,
Cleveland,
www.garlandco.com[1]
Source URL: https://www.metalconstructionnews.com/articles/editors-pick-watertight-design-keeps-air-force-base-hangar-afloat/
Copyright ©2026 Metal Construction News unless otherwise noted.