by Jonathan McGaha | 23 April 2012 12:00 am
The metal construction industry contains a number of products and ever-progressing innovation in its use of metal panels, insulation and more. Each year, exhibitors at METALCON debut new products at its New Product Harbor. However, despite tweaks or adjustments to already existing products, the industry is seeing a rise in the manufacturing of multifunction products.
For the purposes of this article, a multifunction product is one that serves two or more functions within its design; a hybrid that fulfills more than one building need. General contractors should take note of multifunction products due to their ability to improve the contractor’s, as well as a project’s, bottom line.
“Competition for sales dollars in a tough economy makes multifunction products more attractive,” notes Rick Kincy, director of sales at Houston-based Dominion Building Products. Kincy’s point stems from simple logic. Why should a contractor pay for two separate products when one product can save time and money? According to Mike Toohey, marketing manager with New Haven, Conn.-based Bilco, “[Multifunction products offer] a savings in material and installation costs, as well as a more efficient use of space.”
Simply cutting down on the amount of product at a job site increases available space on the job site and in the final project space. Moreover, multifunction products can give contractors the edge when placing a bid on a project. “The more ways a product can fill a customer’s need, the better chance a product has of being selected on a project,” says Kincy. “Multifunction products can bring advantages to the builder that make its offering stand out to the building owner.” Using multifunction products does not necessarily mean a contractor needs to make his or her bid lower, but rather shows an innovation and forethought that could mean a new construction job.
Manufacturers will continue to pursue the development of multifunction products. “New products and brand extensions that will provide multiple functions are under development,” says Pickens. “We will continue to concentrate on products for the building envelope.” From the roof to the walls, customers appreciate the ease and efficiency multifunction products provide.
Type GS Roof Hatch

Multiple functions: Roof hatch and skylight
Manufacturer: Bilco, New Haven, Conn., www.bilco.com
Main features: A skylight roof hatch with a polycarbonate dome that allows natural lighting. Rugged aluminum construction will provide years of maintenance-free service. “[Customers] like our ability to combine the natural lighting of a skylight with the dependability of
a BILCO roof hatch,” says Toohey. Toohey enjoys the products’ ability to provide natural lighting while satisfy
ing fall protection requirements.
Thermal Window
Multiple functions:
Thermal window with insulation properties
Manufacturer: Dominion Building Products, Houston, www.dominionproducts.com
Main features: The product is a self-framing, self-flashing commercial thermal brake window for 2-, 2 1/2- and 3-inch insulated panels. Most of these exterior building envelope panel systems are sent sheared to length so the window rough opening is completely laid out when the panels are in place. This window system includes all the flashing fins, fasteners and sealant required to completely install and seal the window.
Kincy notes that customers enjoy the completeness of the window, as a separate framed opening, flashing trim and extra sealant are not required. The direct nature of the distribution chain shortens the lead time to a couple weeks. “This window product was specifically designed for installation into insulated panels,” he adds.
“Custom aluminum extrusions are factory fabricated, attached and sealed to the window in a controlled environment. The customer does not have to fabricate or seal on the job site.”
HPCI Barrier Wall Panel
Multiple functions: Metal wall panel and vapor barrier

Manufacturer: Metl-Span, Lewisville, Texas, www.metlspan.com
Main features: The HPCI Barrier wall panel is a single element, insulated metal panel that provides an economical solution to conventional air, water, thermal and vapor control. There are no thermal bridges that reduce the energy efficiency in the wall. The panel is located completely outside the structural supports, making it quick to install, and can be used behind many types of façades.
“HPCI Barrier wall panel gives designers the ability to use other façade materials without sacrificing the benefits they have become accustom to with insulated metal panels,” says Doug Pickens, vice president of marketing for Metl-Span. “[My favorite feature of this product is] its exceptionally high insulating value. Designers are able to meet the increasing standards and performance criteria for thermal efficiency defined by ASHRAE 90.1 with a much thinner wall assembly than with traditional stud cavity walls.”
CLAD-GARD R
Multiple functions: Roofing underlayment and skid-resistant vapor membrane
Manufacturer: Firestone Building Products Co., Indianapolis, www.firestonebpco.com
Main features: CLAD-GARD R is a Styrene-Butadiene-Styrene rubber modified, self-adhesive membrane reinforced with a non-woven fiberglass mat. CLAD-GARD R is skid-resistant, high-temp resistant, self seals around fasteners, split-back release liner and UV-resistant for exposure up to 60 days.
“The product is very easy to install and available at a very competitive price point,” notes Robert Anderson, Firestone Building Products’ metal products product manager. “[I enjoy] the textured, skid-resistant traction film on the top surface. Roofer’s safety was our number priority in developing this product.”
Source URL: https://www.metalconstructionnews.com/articles/functional-features/
Copyright ©2026 Metal Construction News unless otherwise noted.