Metal Cladding Options

by Jonathan McGaha | 27 February 2012 12:00 am

By Administrator

There are a number of metal cladding options available on the market today from which the architect or specifier can choose. Some of these include: factory insulated, metal plate, roll-formed and composite panels systems, just to name a few. For the purposes of this article, we will focus on composite panel systems. More specifically, we will take a look at some questions that should be asked to help select the right option for a particular project.

The Decision Factors

As with anything, there are certain key factors to evaluate in order to make a proper selection. For composite cladding systems, the main items for consideration include: budget, application, composition (performance), finish and attachment. These items are not necessary sequential and any of the five can be weighed more heavily in any particular situation. While this list is not all-inclusive, most other considerations trace back to these basic attributes.

Budget

This factor is perhaps the most obvious, but also perhaps the most essential. Simply put, as the available budget increases, so does the level of performance and aesthetics for the panel system. However, desirable options are available for nearly all budget levels. It just depends on which attributes are most important to the designer and the project.

Application

While not necessarily sequential, perhaps the next most logical step in determining the right panel or system is identifying how and where the product will be used.

While not necessarily sequential, perhaps the next most logical step in determining the right panel or system is identifying how and where the product will be used.

Understanding how and where the panel system is to be used will help determine what properties it should possess.

Common applications include:

Composition (Performance)

Another key part of selecting a system is identifying what type of material will be suitable to meet the requirements of the application. Composite panels are available with several different cores including plywood, high-density polypropylene, polyethylene and phenolic resin.

The material that is right for each application can most likely be determined by its characteristics (or performance). For example, is it required that the composite panel be water resistant, impact resistant or even fire resistant? Is a lightweight panel preferred or does the application require something with the ability to withstand more abuse? Are there code requirements that have to be met? Is durability the main concern or aesthetics? Will the panel be required to be field curved or factory curved?

How those questions are answered will determine what composition is best suited for a particular project.

Common core materials include:

Finish

The most common finish in the industry today for composite panels is painted aluminum (spray or coil-coated). Other options are also available where the metal itself is the finish, such as stainless steel, copper and zinc. In addition, there is a third category in which the metal is changed or treated through a chemical process called anodizing. Further still, a number of finishes are available in which the metal is embossed or in some cases brushed with a pattern of some sort.

Common finishes include:

Installation

Composite panel system installation options fall into two basic categories: field-assembled systems and shop-fabricated systems. All composite installation methods are comprised of the panel itself, the aluminum attachment extrusions and any necessary accessories (i.e. sealant, mechanical fasteners, etc).

In field-assembled systems, the panels and attachment extrusions are shipped directly from the sheet manufacturer to the job site where they are cut to the appropriate size in the field and installed. For shop-fabricated systems, the panels are shipped from the sheet manufacturer to a fabricator to cut the panels to size and attach the extrusions. The assembled units are then sent on to the job site for installation.

Common options for installation include:

With all of the options available within our industry today for composite cladding, knowing which panel or system is right for your application starts with asking the right questions. The answers to those questions should begin to reveal which product might be the right solution.

Sean Walker is the marketing manager for Citadel Architectural Products Inc., Indianapolis. To learn more, visit www.citadelap.com

Source URL: https://www.metalconstructionnews.com/articles/metal-cladding-options/