Metal Roofing’s Advantages

by Jonathan McGaha | 27 December 2012 12:00 am

By Administrator

According to Raleigh, N.C.-based FMI Corp., metal roofing is growing in commercial and residential roofing market share. The promotion of its features and benefits to contractors and building owners is one of the reasons why this is happening. Metal roofing is a lightweight, strong, durable and noncombustible product that offers design flexibility and energy efficiency for many types of construction.

Durability

Metal roofing’s durability is intuitive to many users. Metal roofing’s family includes natural metals such as zinc and copper. The use of such materials for roofing applications in Europe has shown that these natural metal products can have a useful service life measured in decades, if not centuries. In the U.S., coated steel has the largest share of metal roofing. Even these materials are very durable relative to their competitive materials that generally provide service life for up to 25 years.

An example is Galvalume coated steel sheet, which is steel roofing protected with a 55 percent aluminum-zinc alloy hot dip coating. Inspections of Galvalume roof installations by the metal roofing industry have taken place since the coated steel product was first introduced in 1972. Those inspections have revealed useful service life of the product in most climate regions over the past 40 years. A more robust analysis of the projected life of Galvalume roof assemblies suggests that this coated steel roofing product, used in a roof system, could provide useful service for at least 60 years and significantly longer in certain environments.

Renewable energy uses

Metal roofing’s durability comes into play when considering renewable energy sources installed on rooftops. The typical photovoltaic or solar thermal system is expected to provide energy production and/or savings over 25 years. As stated above, the durability of metal roofing can exceed 60 years in some cases. Hence, using metal roofing as a platform for renewable energy technologies alleviates the need to remove the renewable energy equipment before the roof itself needs replacement. Instead, with metal roofing, the roof system can outlast the renewable energy equipment, preventing the disruptions, cost and interruption in energy production or savings during replacement of a roof material.

Photovoltaic energy modules

Another advantage of metal roofing compared to other conventional roofing materials is that attaching photovoltaic energy modules on metal roofing is done without penetrating the metal panels. This is the case with crystalline PV modules mechanically attached and also thin film PV that can be laminated to the metal surface. By eliminating penetration, the integrity of the roof surface is prolonged even more.

These features are important when considering a roofing material for retrofitting existing roof systems. A metal roof retrofitting an existing low-slope or steep-slope roof can introduce a long-lasting platform for renewable energy technologies that may not have been installed prior to the retrofit.

The strength and rigidity of metal roofing allows it to be installed over an existing roof that is offset in a way as to create an air space between the two roof surfaces. The air space created between the two layers can introduce solar thermal systems, additional insulation or air flow.

Cooling effect

A natural convective cooling effect can take place in the space as air flows from the eave to the ridge and dissipates heat beneath the new roof surface. This phenomenon is referred to as Above Sheathing Ventilation (ASV). Research at the Department of Energy’s Oak Ridge National Laboratory, Oak Ridge, Tenn., suggests that ASV can reduce the heat gain through a metal roof assembly into the building space beneath by 30 percent.

Another feature of metal roofing is that many coated steel and aluminum substrates are routinely painted for aesthetic purposes in steepslope applications. Metal sheet steel is painted in a continuous coil coating process where coils of steel or aluminum are cleaned, pretreated, primed and finish coated, following oven baking, at speeds of 300-1000 fpm.

The continuous painting process is done in closed loop environmentally responsible facilities that capture volatile organic compounds from the primers and finish coats, and incinerates them as a fuel source for the curing ovens.

Special pigments

The paint systems used today can be formulated with special pigments that have high infrared reflectance. That helps to increase the overall solar reflectance of prepainted metal roofing, with little or no added cost. Competitive roofing product companies have recently introduced cool versions of their products, but often with a significant change to their manufacturing process and a corresponding increase in the price.

Scott Kriner is president of Green Metal Consulting Inc., Macungie, Pa.; principal in RSK Avanti Partners LLC, Richardson, Texas; and technical director of the Metal Construction Association (MCA), Glenview, Ill. For more information, go to www.greenmetalconsulting. com, www.rskavantipartners.com and www. metalconstruction.org.

Source URL: https://www.metalconstructionnews.com/articles/metal-roofings-advantages/