by Jonathan McGaha | 31 August 2011 12:00 am

The focus on sustainable building design is creating a fundamental shift in the way that new projects are approached by architects, designers and engineers. As they search for material solutions that provide energy and cost efficiencies, steel is available to help them meet the highest sustainability standards.
The term “sustainability” continues to evolve in definition and scope. Two areas that come under its purview are recycled content of materials and enhanced energy performance. Some standards also include sound and acoustics as “green” practices. Understanding each of these issues is important to ensuring the future competitiveness of cold-formed steel framing.
All steel products contain recycled steel. Steel framing contains at least 28 percent recycled steel and is completely recyclable. Using recycled steel saves renewable resources. A typical 2,000-square-foot home requires about 40 to 50 trees, but with steel, only the equivalent of about four scrapped automobiles is needed.
In contrast to many other building materials, steel is routinely collected in aggregate quantities from construction and demolition sites and recycled into new steel products. According to the Steel Recycling Institute, the recycling rate of structural steel products in North America is 98 percent (2009 data, the most recent available), the highest of any construction material.
Steel is recognized in all major green building standards and rating programs, including the National Green Building Standard
(ICC-700) for residential buildings, ASHRAE Standard 189.1 for commercial construction, and the U.S. Green Building Council’s LEED program that covers all types of buildings. Steel is the only material with an automatic minimum default value for recycled content in the LEED program.
Sustainable building practices offer a wide range of benefits to owners and occupants. But many practices are being driven by the U.S. government, adding substantial momentum to the process to adopt green codes and standards by tying federal funding to compliance with the International Energy Conservation Code and the ASHRAE 90.1 standard for commercial building energy efficiency. The American Recovery and Reinvestment Act of 2009 requires states to adopt the 2009 IECC and upgrade to the 2012 edition when it becomes available as a requirement for receiving federal funds.
The 2012 IECC calls for the increased use and thickness of continuous insulation on the exterior walls of cold-formed steel and other buildings. The steel industry has developed innovative systems that effectively eliminate or reduce thermal bridging, including steel panels embedded into foam insulation, “warm wall” designs where steel is placed entirely inside the insulation layer, and cost-effective ways to use continuous foam insulation. The Steel Framing Alliance’s “Thermal Design and Code Compliance for Cold-Formed Steel Walls” design guide describes how to use a building simulation or performance approach to get the most out of building design.
With so many changes to the building codes, designers and manufacturers would do well to take a whole building design approach to the energy package, using readily available simulation tools. Increased interaction between different professionals involved in the design process would ensure greater efficiencies. By getting involved in the early stages of the project with structural designers, steel framers and manufacturers could ensure a high-performing building without having to add needlessly excessive costs.
An increased focus on sound and acoustical issues in building design has the potential to significantly impact cold-formed steel framing. In addition to trying to increase the current sound transmission coefficients (STC ratings) to separate spaces from noise generated inside the building, ASHRAE 189.1 and the International Green Construction Code have existing or proposed language to provide minimum sound-rated construction for sound generated from outside.
If this language takes hold, the industry will need to expand the number of tested assemblies available, making them more expensive and potentially less competitive. This issue may not just be limited to green building codes and standards. The International Code Council has established a task group to examine possible deficiencies in sound transmission in the codes, which may result in a push for higher requirements in the regular building codes as well.
Sustainable building design is creating a dynamic and challenging environment for all materials. To ensure future competitiveness, our industry needs to be aware of the many changes taking place, make sure our voices are heard in decisions that impact our business, and take an active role in developing new technologies and providing input to new and revised green codes and standards that will influence steel as a material solution for years to come. Additionally, many in the industry will need to expand their roles in the design process from just looking at the structural system to analyzing the interaction of the structure with energy and other systems in the building.
Mark Nowak is president of the Steel Framing Alliance in Washington, D.C. The SFA is a trade group representing steel producers, manufacturers, suppliers and contractors whose mission includes improving the competitiveness of cold-formed steel load bearing and other cold-formed steel members. For more information, visit
www.steelframing.org.
Source URL: https://www.metalconstructionnews.com/articles/sept-2011-industry-perspective/
Copyright ©2026 Metal Construction News unless otherwise noted.