by Jonathan McGaha | 3 June 2013 12:00 am
When designing a facility that incorporates an opening that extends the full width and height of the structure, architects have two primary choices: a bottom rolling, multipanel door system or a horizontal bi-fold door system. While the alternatives may seem limited, each system is distinguished by unique design characteristics, operational capabilities and installation requirements, and a multitude of options.
Size matters
Selecting large-scale specialty doors involves several criteria, including facility use, aesthetics, climate, site restrictions and opening size. By design, the bottom rolling door system will allow a larger clear opening, while the bi-fold is limited in width and height. So, when deciding which system is right for your application, the opening is the best place to start. Horizontal bi-fold doors usually range in size up to 120 feet wide, with a 12- to 25-foot clear opening height.
![]() |
|
The door is attached to the building at the top and is welded to either a steel header or to stub columns, both of which are then laterally supported. Steel columns on each side of the opening provide the rolling surface for the bi-fold as it is raised and lowered. Building deflection must be kept to a minimum with a bi-fold door and there will be a wedge formed by the clear opening height and the overall size of the door panels.
Choosing either aircraft-grade aluminum or steel to fabricate the doors depends again on size, building deflection and climate. The ability to allow a large clear opening makes the bi-fold a great choice for small- to medium-sized aircraft hangars, museums, churches, sports complexes, entertainment venues and crane applications.
Opening sizes and panel configurations for bottom rolling doors vary dramatically. This type of system is typically seen on commercial airline hangars, where sizes of over 120 feet wide by 45 feet high are not unusual. In fact, the sky is the limit on height and width depending on the building, climate and site restrictions. Sometimes, rolling doors are used in combination with a strategically placed bi-fold to accommodate tail doors on large aircraft. Because of their flexible design, bottom rolling doors are also ideal for military, marine, agricultural and industrial facilities where access for large equipment is essential.
Door operation
While the horizontal bi-fold door moves up and down with only two panels, bottom rolling systems feature multiple panels that can be designed in a variety of configurations. Center parting, floating, one-way and 90-degree door styles can be engineered for different building types, environmental conditions and functionality. Electrical systems and controls may differ, depending on the style of door system and, for bottom rolling doors, the operating configuration.
One major advantage of the bottom rolling system is that, in the event of a power failure, the clutches can be easily released and the doors operated manually or with the aid of a tow device. To ensure uninterrupted use, bi-fold doors emergency generators are recommended.
Installation 101
Another consideration in the selection of a large specialty door is the installation process. The bi-fold can usually be delivered and installed in a relatively short time. Some field welding will be required and properly sized lift equipment is key to a successful installation. Even without prior experience, a bi-fold door is relatively simple for a professional contractor to install using clear written directions and instructional videos.
Bottom rolling door systems require unique skill sets of the installation crews. Because all of the weight is transferred to the bottom of the door into the steel rails that are set into the concrete, installation of this part of the system is extremely important. Each rail is laid out on a grid of supports and the entire layout is leveled, welded together and then encased in concrete. This defines the placement, spacing and mobility of the entire system and is usually performed by experienced concrete and iron workers.
The top rails and supports can be easily assembled on the ground, lifted into place and aligned with the bottom rails. The door panels are shipped unassembled, and are sheeted and insulated before being lifted into position. For easier lifting and maneuvering of the door panels, a pre-engineered detachable lifting arm can be fabricated or may even be supplied by the door manufacturer.
Form and function
Large specialty doors with windows, glass panels, personnel doors and other custom options are all possibilities in both bi-fold and bottom rolling door systems. With each designed and built for a unique project in almost any size, there are many ways to achieve an aesthetically pleasing, functional and reliable covering for even the most challenging opening.
Jim Davis is the operations manager at Wilson Industrial Doors, Elkhorn, Wis. For more information, visit www.wilsondoors.com[1].
Source URL: https://www.metalconstructionnews.com/articles/specialty-door-options-are-wide-open/
Copyright ©2026 Metal Construction News unless otherwise noted.