Laminators Inc. Renews Miami-Dade NOA

by Marcy Marro | 24 July 2018 12:00 am

Laminators Inc.[1] has renewed the Notice of Acceptance (NOA)[2] from Miami-Dade County Product Control Section for Omega-Lite ACM panels[3] installed with all four (4) of the company’s installation systems under NOA # 18-0214.03[4], expiring on August 20, 2020. The NOA certifies that Omega-Lite ACM, installed with Laminators’ 1-Piece, Tight-Fit Molding, Clip & Caulk, Rout & Return and Dry Seal installation systems[5], was designed and tested to the strict protocols required in Miami-Dade County.

Laminators Inc.’s Omega-Lite ACM panels[6] and installation systems[7] are approved for use in all HVHZs with a design wind pressure of +/- 120 pounds per square foot. Each installation system met the requirements of the small and large missile impact testing using Omega-Lite ACM panel over a plywood substrate.

Omega-Lite ACM panels[8] offer a highly decorative, strong, and durable surface finish for exterior wall surfaces. Composed of a polypropylene, corrugated core between two finished aluminum sheets, the lightweight panels are non-absorbent, water-resistant, and easy to maintain.

Endnotes:
  1. Laminators Inc.: https://www.laminatorsinc.com/
  2. Notice of Acceptance (NOA): https://t.e2ma.net/click/gm9vm/cbyonm/sr1uod
  3. Omega-Lite ACM panels: https://t.e2ma.net/click/gm9vm/cbyonm/8j2uod
  4. NOA # 18-0214.03: https://t.e2ma.net/click/gm9vm/cbyonm/oc3uod
  5. installation systems: https://t.e2ma.net/click/gm9vm/cbyonm/443uod
  6. Omega-Lite ACM panels: https://t.e2ma.net/click/gm9vm/cbyonm/kx4uod
  7. installation systems: https://t.e2ma.net/click/gm9vm/cbyonm/0p5uod
  8. Omega-Lite ACM panels: https://t.e2ma.net/click/gm9vm/cbyonm/gi6uod

Source URL: https://www.metalconstructionnews.com/news/daily-news/laminators-inc-renews-miami-dade-noa/

Copyright ©2025 Metal Construction News unless otherwise noted.