Applications for cold-formed steel framing are growing every year. While steel framing has long been the primary material used for conventional tenant improvement due to its light weight, non-combustibility and recyclability, architects, engineers and contractors are recognizing that rollformed steel shapes are an ideal construction material for new commercial construction as well as complex renovation projects. Due notably to the work being done by numerous committees sponsored by the American Iron and Steel Institute and the Cold-Formed Steel Engineers Institute, building codes over the past decade have adopted CFS framing as a safe, cost-effective and environmentally responsible building material for ever more diverse applications. Beginning in the late 1990s, the International Building Code began integrating a prescriptive method of CFS into the latest versions of their code. This method, developed by the AISI and CFSEI, gave architects and building owners more flexibility and design options than ever before. Further integration of CFS into this code is currently ongoing.
The accepted use of CFS in these more diverse applications means that manufacturers of steel framing are being looked to more than ever as a “go-to” resource for design and engineering solutions by the architect, contractor and even the engineer. Given many design professionals’ lack of experience using CFS in less traditional applications, manufacturers are being relied upon to provide guidance, product recommendations, and often complete design and engineering packages along with the material. While this has frequently been the case regarding structural and curtain wall applications, it is becoming more common for the manufacturer to be brought in on projects where sound requirements and unique architectural challenges go beyond the design professional’s experience. Because of the unmatched recyclability of CFS, producers are also being asked to assist with LEED compliance issues. As a result, manufacturers of CFS framing are finding that in order to grow they need to expand their businesses to include technical support as well as design, engineering and LEED compliance services.
For example, Edison, N.J.-based Super Stud Building Products was recently called in to consult on a very high-end renovation project in Manhattan. We had provided the material package for this project, and due to some very unique design challenges, the general contractor reached out to us to assist the architect and engineer to address issues with framing detail and system integration. The project was in the Met Life Tower on Park Avenue and involved a confidential client who wanted to utilize a utility and storage floor that had never been framed out. Specifically, the project required construction of sound proof conference and audio-visual rooms, as well as offices and a fire proof archive. The floor was in the upper part of the tower and commanded extraordinary views of Manhattan. The general contractor, architect and engineer were faced with having to design code compliant walls and ceilings to conform to large mechanical runs throughout a floor that was not initially intended for such occupancy. Adding to the challenge was the fact that the floor also contained the air handling units for the upper third of the tower, so there was an ever present mechanical hum that resonated throughout much of the usable space. Finally, the sound proof AV room was going to have to bear the weight of a separate mechanical unit, as well as a significant amount of high-tech equipment suspended from both the ceiling and the walls. In short, it was going to be a load-bearing structure within a structure. Neither the general contractor, architect nor engineer had ever dealt with similar design challenges, so as the manufacturer, we were brought in to recommend engineering, acoustical and design details that would best address these parameters. A planning meeting was held on site with all parties involved in the project, followed by numerous phone consultations. Working together, design and framing solutions were developed and implemented, and the end result was a successful project with a pleased owner.
Given the slow pace of new construction in today’s economy, project challenges, such as represented with this one in Manhattan, are becoming more commonplace, and component manufacturers are being brought in on an ever broadening scope to assist with these issues. Not just manufacturers of CFS framing, but companies involved in the manufacturing of numerous building products and components are finding it necessary to familiarize themselves with other products that are used in conjunction with each other in the building envelope. Building technologies such as BIM and new challenges brought about by tough new energy codes are also necessitating producers to better understand how systems and components work together. The companies that recognize and embrace these changes to the status quo in the construction industry are going to be best positioned to serve customers’ needs and to grow.
Curt Kinney is the vice president of marketing and business development at Super Stud Building Products, Edison, N.J. For more information, visit www.buysuperstud.com.





