Metal Construction News sat down with two industry experts to get their thoughts and opinions on the state of the HVAC and insulation industry, and find out what they see in current technology and the future of this market segment.
MCN: What are the current trends in HVAC systems within metal buildings?
Ken Williams, Director of Marketing, Cambridge Engineering Inc.: More than ever before, metal building owners and tenants are taking a new look at how an HVAC system can help improve their bottom line. They want modern HVAC equipment that will reduce operating costs and improve employee productivity to increase company profits. That means they are looking for low-maintenance HVAC systems that save energy and improve indoor air quality.
Dan Drexler, Director of Marketing, Cambridge Engineering Inc.: The obvious trend is for companies to look at their HVAC system as one part of a whole building design. Building managers are realizing more and more that insulation and ventilation play a key factor in their HVAC system decisions. Particularly in metal buildings, the ventilation system is becoming a central aspect of the decision-making process. It’s critical that building managers minimize the amount of moisture introduced into a metal building, and proper ventilation and HVAC systems address this key point, which greatly prolongs the life of a building.
MCN: What are the current/future innovations in this industry that you have your eye on (including materials, etc.)?
Williams: Today’s biggest problem facing metal building owners and tenants is a lack of available cash or bank financing to expand current facilities, or to simply make needed building improvements such as putting on a new roof or installing more energy-efficient HVAC equipment and lighting systems. We’ve found a solution to this issue for our clients by combining the installation of energy efficient warehouse heating and lighting systems with EPAct Federal tax benefits of up to $1.80 per square foot, along with the necessary financing sources. The result of combining these four components is the ability of the building owner or tenant to upgrade their facility with the latest heating and lighting technology without any cash outlay. This can be 100 percent financed and typically creates a positive cash flow from day one that can be used to make other building improvements.
Drexler: For many years, innovations in the industry were product-specific. We definitely see a trend moving toward complete system innovations that consider a system’s efficiency over a single component within that system. This certainly can include more efficient components within a product. However, it’s also true that individual technologies that work wonderfully on their own, fall short when paired with other technologies. We’re continuing to see complete system innovations replace single product innovations. Spending on facilities is definitely tighter now than we’ve seen in many years. Building owners and facilities’ managers have come up to speed quickly on understanding these system innovations and are not looking at only one product.
MCN: What are the newest installation trends or techniques in insulating HVAC systems for metal buildings? What are the advantages/disadvantages?
Williams: The decrease in new construction projects has resulted in an increase in HVAC rehab and retrofit projects for existing buildings. That means contractors are installing more energy-efficient HVAC equipment that has the flexibility to be installed almost anywhere it needs to be—inside or outside the building. Another trend involves the increased popularity of using natural lighting and solar panels on the roof. This means large rooftop HVAC equipment is being replaced with more compact units that have a smaller roof footprint, or taking the heating equipment completely off the roof and using easy-to-install, through-wall designs.
Drexler: Faster installation times and ease of maintenance are really the driving forces in HVAC, and modularity seems to be a trend that is not going away. To be able bolt a few pieces of equipment together, run gas and electric to a unit and have it up and running as an energy efficient system has always been attractive. The ability to expand on that system with modular components is even more attractive. Building owners want a proven design with no worries about high maintenance or upkeep. These modular systems provide the necessary redundancy along with both the ease of installation and low maintenance costs.
MCN: Where is the growth area/market segment for HVAC? Please explain.
Williams: Without a doubt, cost-effective HVAC systems that save energy and improve indoor air quality is what everyone wants and represents the biggest growth area for all market segments. Federal and state tax benefits along with utility rebates have been a big help in sustaining this growth, and I expect this trend to continue in the foreseeable future.
Drexler: No one in our industry will deny that it’s been a rough couple years for general contractors and equipment suppliers. While new construction continues to lag, real focus continues to be given to products that seem to complement an environmental agenda. Building managers are looking at reducing operating expenses primarily through reducing natural gas or fuel consumption and reducing kwh usage. Lighting systems, more efficient motors, newer and more efficient compressor designs and improving existing HVAC systems are really driving growth in this sector. More people are realizing that installing these green systems provides a quick return on their investment.
MCN: How does HVAC play a part in the green building movement?
Williams: For HVAC equipment, going green boils down to saving energy and providing more ventilation to improve indoor air quality. Saving energy also means a corresponding reduction in carbon dioxide and other greenhouse gases to reduce air pollution. As an example, we are actively involved in reducing the energy used to heat and ventilate warehouses and large distribution centers. The Department of Energy estimates warehouses account for 8 percent of the total energy consumed for all commercial buildings, and heating them consumes about half the onsite energy. This totals a staggering 200 trillion Btu per year. To put this in perspective for a metal building owner or tenant, replacing unit heaters in a 100,000-square-foot [9,290-m2] Chicago warehouse with more energy efficient blow-through type space heaters, can reduce the energy required to heat the warehouse by 50 percent. That prevents 88 [79 metric tons] of CO2 from going into the atmosphere each year—the same as planting more than 272 trees each year or taking 16 cars off the road.
Drexler: Your HVAC system is one of the largest components to consider when making your building green. Of course, everyone’s definition of green varies. You can have a very inefficient system that uses high-efficiency equipment. I continue to point to the trend that building owners, particularly in metal buildings, assess their needs on system efficiency, including their use of smart ventilation. I see a real trend moving toward hybrid cooling in industrial buildings. More and more industrial building owners are realizing that trying to air condition their space simply doesn’t make good economic sense. Hybrid cooling, which incorporates natural means of cooling, minimizes the need to load up on unnecessary cooling systems. It’s really a balancing act of properly insulating your building, providing the necessary ventilation and playing with the laws of nature to help with the HVAC process.
MCN: Will adjustments to codes and regulations have a significant impact on HVAC systems for metal buildings in the near future?
Williams: ASHRAE 90.1 is the nation’s standard model for establishing the energy performance requirements for commercial/industrial buildings, and it has been adopted as part of state and local energy codes in some jurisdictions. Compliance with ASHRAE 90.1 is often a prerequisite for government buildings, utility rebates, federal tax deductions and LEED certified buildings. HVAC equipment should now have ASHRAE 90.1 compliance stamped on the nameplate.
Drexler: What’s going to be difficult for equipment suppliers is the trend of states to adopt different standards for equipment, particularly with little regard to the current trends in system design. Codes and regulations vary widely from municipalities to counties to states, which is why building owners have to rely on a quality local installing contractor to maneuver through the minefield. The challenge is definitely on the industry to educate state and local officials about the variety of technologies on the market and the specific purpose each serves.
MCN: What advancements/changes do you expect to see in the HVAC market over the next 12 to 24 months (materials, codes, demand, etc.)?
Williams: I may sound like a broken record, but saving energy and reducing a building’s carbon footprint will without a doubt continue to drive advancements and changes in the HVAC market. This will be encouraged by new local energy codes, more government tax benefits and utility rebates for installing more sustainable energy-efficient HVAC systems.
Drexler: Legislation changes, whether federal, state or local, could always play a role in the changing landscape for the industry. However, I really don’t see tremendous changes, largely driven by the economy. Many general contractors and builders continue to remain in a survival mode while the economic recovery reaches across the nation. Legislators are certainly not blind to this reality. We will, however, continue to see product development with an eye toward energy conservation. This could be better system efficiencies, more use of natural ventilation and heating or continued progress toward modular designs. Many companies have used this slower period to focus on R&D, so we’re bound to see some advancements introduced.





