Columns

Deck Building

By Administrator The increased availability and popularity of metal joist products designed for residential and commercial outdoor decks, as well as the abundance of different decking materials on the market, has required the development of new fastening systems. Deck materials and requirements While treated lumber will likely remain the most common substructure for residential decks… Continue reading Deck Building
By Administrator

The increased availability and popularity of starborn_industries metal joist products designed for residential and commercial outdoor decks, as well as the abundance of different decking materials on the market, has required the development of new fastening systems.

Deck materials and requirements

While treated lumber will likely remain the most common substructure for residential decks in the near future, many contractors and deck builders are using steel and aluminum deck framing systems in order to achieve increased durability and longevity, as well as to meet local regulations. For instance, metal joist systems are now required in some areas to meet building codes, particularly in dry areas where wildfires are a concern, as well as in some dense urban areas. In addition, decks designed with metal joists are typically flatter and more uniform than decks built with treated lumber.

Despite the growing popularity of metal joist systems, this market has suffered from a lack of deck fasteners suitable for attaching PVC, composite, capstock and hardwood decking materials to steel and aluminum. Standard deck screws, designed for use with treated lumber substructures, simply will not penetrate through structural steel and aluminum. Typical wood-to-metal fasteners also do not perform well in this application, unless the decking material is pre-drilled, which is, of course, very time consuming. Consequently, the fastening methods used by contractors for this purpose in the past have been somewhat improvised and difficult.

A new fastening system

As a result, leading building products manufacturers, such as Edison, N.J.-based Starborn Industries have worked directly with metal joist system manufacturers and contractors to develop fastening systems like Deckfast Metal, a color-matched, epoxy-coated, 410 stainless steel screw, designed specifically to attach nearly every form of decking: PVC, composite, capstock and hardwood to steel and aluminum.

Deckfast Metal has been approved for use with both Trex Elevations steel deck framing and Wahoo Decks and Wahoo Docks aluminum joist systems.

Fasteners for this application are basically a hybrid of self-tapping screws with wings and composite deck screws. The drill point with wings efficiently penetrates through steel and aluminum joists. (Wings are critical, especially for PVC and composite deck boards, because they clear material away from the cutting edge of the drill point). Once the wings shear off as they hit the metal joist and the fine threads of the fastener engage the joist, the specialized composite-style screw head, typically formed with an undercut below the “cheese head” to enable the fastener to drive and cut cleanly through the hard outer surface of the decking material, firmly anchors the deck board to the metal joist.

To achieve corrosion resistance and adequate hardness, 410 stainless steel is an optimal material for this type of fastener.
(Grades 305 and 316 stainless steel are too soft to penetrate through steel and aluminum joists). Additional corrosion resistance is provided by epoxy coatings, which can also be color matched to specific decking products on the market, making the fastener relatively invisible on the decking surface.

Ultimately, the bottom line for most contractors and their customers alike is quality and longevity. Metal joists for use with outdoor decks are just beginning to penetrate the market, and will continue to grow in popularity. Fastener technologies will have to continue to adapt to the new requirements and specifications of these structural systems in order to provide the ease-of-use, durability and reliability that builders have become accustomed to with more standard framing systems.

Steven Gertner is the marketing manager for Starborn Industries Inc., Edison, N.J. For more information, visit www.starbornindustries.com