The Pima Air and Space Museum in Tucson, Ariz., is one of the largest air and space museums in the world, and the largest non-government funded aviation museum. Visitors are treated to more than 300 aircraft and spacecraft, including many of the most historically significant and technically advanced craft ever produced, both from the United States and throughout the world.
Not only is PASM the site of more than 300 aircraft, but the museum also operates the 309th Aerospace Maintenance and Regeneration Group, or the “Boneyard,” which is located right next to the Davis-Monothan Air Force Base. M3 Engineering, Tucson, helped create the “Spirit of Freedom Hangar,” which houses a number of the world’s most rare aircraft, including the oldest SR-71 Blackbird, the Martin PBM-5A Mariner and the North American F-107 Ultra Sabre.
PASM’s location in Arizona’s arid climate proved to be an architectural challenge. As Architect Steve Dawe, AIA, LEED AP, with M3 Engineering, notes, “Sun control is always a challenge in the desert southwest and equally important for the protection of museum artifacts. The best environmental response to the sun and heat is always through passive measures. For our projects at PASM, key sun control design features included building orientation, extensive use of opaque walls and large shaded overhangs.”
A museum with so many priceless pieces needed a great structure to store the aviation artifacts. The $2.5 million facility features a metal building, roof and walls from Houston-based Mid-West Steel Building Co. The museum is 200 feet wide by 100 feet long with a 4:12 roof slope, and features Mid-West’s PBR panels for the endwalls and roof. Started in March 2010, the project was completed in December 2010. “For the metal wall panels of the pre-engineered metal building hangar, Mid- West’s PBR panel was a good match to the existing hangar wall panels. All of these elements will be repeated in future development of the museum,” states Dawe.
So what’s next for PASM? “We have already begun on the next project at PASM, a major renovation of the 390th Memorial Museum hangar housing a WWII B-17,” explains Dawe. “This project will include not only an upgrade of the museum exhibits themselves, but also an entirely new east entrance building that will carry on with the vocabulary and forms established with the initial Spirit of Freedom Hangar.”
Pima Air and Space Museum, Tucson, Ariz. Builder, erector and roofing contractor: Fast Fab Erectors Inc., Tucson
Architect: M3 Engineering, Tucson
Metal building, roof and walls: Mid-West Steel Building Co., Houston, www.mid-weststeel.com






