Scrap issues cause frequent unwelcomed problems for all tube and pipe producers at one time or another. They can be costly and cause delays in production. Every effort should be employed to avoid scrap. Chuck Gehrisch, president of Roll-Kraft, Mentor, Ohio, points out, “Preventing scrap is absolutely critical to increasing profits.” That is why Roll-Kraft has developed a specific list of issues that should be avoided in order to improve quality and production. Appearing prominently on the list is the use of proper materials. Materials that are inconsistent chemically, have improper strip width-to-gauge tolerances, crown or camber problems, and perhaps inconsistent slit edge conditions will lead to difficulties. Producing a good tube and pipe product requires beginning with good material. Scrap can also be caused by improper setups on the mill. A setup chart should always be used as a reference. This will provide assurance that the rolls are in the proper position. Documenting and repeating setup patterns will save time and give accuracy during future tooling changes. Then, you must be sure the tooling is well designed and made of good quality material. This is not the place to cut costs and accept second best. It will only cost more in the long run. It is very important to do periodic preventative maintenance to determine if the mill needs adjustment or tooling is worn. Mis-alignment and heavily worn tooling will cause problems. The benefits of doing preventative maintenance can far outweigh the replacement costs of time and materials to reproduce the bad production. While it is ideal and often expected that every production run be as planned, taking a few extra steps to evaluate the situation can go a long way in preventing scrap and producing the best possible tube or pipe product. The complete list of tips to avoid scrap can be downloaded and printed from the Roll-Kraft blog spot at the top of the company Web site. Also, there are many technical bulletins on the subject of tube and pipe production, which are available in the Profit Pointer section of the website. Customized solutions to these and other specific issues can be answered by contacting Roll-Kraft directly or choosing Dr. Resolve when visiting the Web site. More information about Roll-Kraft products and services is available on the Web site, www.roll-kraft.com.
Roll-Kraft identifies key factors that affect scrap on tube and pipe mills
Sign up for Metal News
The newsletter of Metal Construction News, delivered every Wednesday
This Month’s Features

METALCON 2026 | MCN Post-Show Report
Did you miss last month’s metal construction industry extravaganza in Orlando? Have no fear, because the METALCON 2026 | MCN Post-Show Report is here!

The November 2026 issue of Metal Construction News is now available!
The November 2026 edition of Metal Construction News is now available!

Cold-formed steel buildings come of age
If you’ve spent any time around cold‑formed buildings, you know cold‑formed steel is in a class of its own. It’s precise, efficient, stubbornly strong,...

Ice damming is not just a leak—it’s an outright thermal failure
For facility managers in the Midwest Industrial Corridor, winter is the ultimate stress test. But while most maintenance teams focus on visible snow accumulation,...


