Connections were featured in Metal Construction News’ June 2022 issue.
Flashing seals transitions
Metallic Products Corp.’s die-formed flashing can be used for applications including wall-to-roof transitions, roof-to-wall transitions and high-side eaves. The flashing comes in R-panel and M/U-panel profiles. It can be broken to fit specific roof pitches prior to shipping. The flashing attaches directly to panels with fasteners and tape mastic. A 10-foot coverage is standard and custom lengths are available. Flashing is produced in Galvalume, Polar White and custom colors. It has oven-cured powder coating that ensures paint adhesion and makes it less susceptible to scratches, fading and flaking.
mpvent.com/die-formed-flashing
Rivets resist loosening
Triangle Fastener Corp.’s blind rivets are used in applications where high clamp load and resistance to loosening are required. Pullout and pullover capacities in steel and aluminum for 1/8-inch and 3/16-inch diameter stainless steel blind rivets are available on the company’s website. There are 50 standard colors.
www.trianglefastener.com/products/rivets
Clamps secure piping
S-5!’s CanDuit pipe clamps restrain, secure and support piping, conduit, condensate lines and other round shapes while protecting metal roofs. They are produced with electrozinc- coated, corrosion-resistant steel and an EPDM liner pad that prevents abrasion. CanDuit pipe clamps come in 14 standard sizes with a pipe outer diameter from 0.79-inch (20-mm) to 4.6- inch (117-mm).
Fasteners match panels
Dynamic Fastener’s 12-11 by 11/4-inch truss head T-17 #25 Torx 300 series stainless steel clip screw has a rounded edge around the outer top rim. Heads can be painted to match panels.
