Roof Accessories and Snow Guards featured in Metal Construction News’ November 2014 issue.
 |
Bilco Bilco’s BIL-Guard Hatch Railing System is a fixed railing system that provides a permanent means of fall protection for hatch openings. Its attachment system features a quick-mount bracket, a pivoting mounting sleeve for installation flexibility and does not penetrate the roofing membrane. BIL-Guard Hatch Railing System mounts directly to the capflashing of any brand of roof hatch and is constructed of fiber-reinforced polymer material. |
 |
EcoFasten Solar EcoFasten Solar’s CorruSlide universal solar roof mount is a hinge that fits all corrugated metal profiles. CorruSlide attaches to the sides of the ribs, not in the valleys where water flows, and may be adjusted North-South and East-West. Five self-tapping and sealing sheet metal screws ensure strength and a watertight seal forms an impenetrable moisture barrier. |
 |
LMCurbs LMCurbs’ SnowGuard System is a continuous snow retention system designed to fit most standing seam profiles and is available as a one- or two-rod system. Low-profile SnoRods retain large accumulations of snow with nonpenetrating clamps, and the SnowGuard System is constructed with a combination of mill-finished aluminum components and stainless hardware. |
 |
Sno Shield Inc. Sno Shield’s clamp-on snow rail is a pipe snow guard system for standing seam metal roofs that clamps to standing seams. The bracket for the snow fence attaches to the roof clamp and pipes are run through the bracket for the length of the roof. The snow retention system is continuous and single- or double-railing snow fences hold back the snow and ice. |
 |
SnoBlox-SnoJax Inc. SnoBlox-SnoJax’s SnoBlox Deuce has a universal design that fits most metal panels and is available in clear and 11 colors. The lab-tested attachment strength for screw-down attachment was 3,456 pounds and 1,379 pounds for adhesive attachment strength. |
 |
TRA Snow and Sun Inc. TRA Snow and Sun’s Deck Mount Snow Fence is designed for installation on most stick framed roof types and works with 3/4-inch-by- 3/4-inch Diamond Mount style square fence pipe and 1-inch Mount Shasta style fence pipe. One or two rail designs are available and the Mount Shasta and Diamond Mount Deck Mount Snow Fences are available in steel, copper and Cor-Ten. Available finishes include raw steel, electro-galvanized steel, hot-dipped galvanized steel, mill-finish copper, mill-finish Cor-Ten and powder-coating. |
